Select your plant or tree
Please check general instructions below;
For optimal performance, dilute TruBiol Plant Antifreeze with non-chlorinated water for all applications. If non-chlorinated water is not available, ensure that the chlorine levels in the water used for mixing are at a minimum before adding TruBiol Plant Antifreeze to the tank.
• It is important to ensure that the water being mixed with TruBiol Plant Antifreeze has a pH value of 7.0 or below.
• Please exercise caution when mixing. If the pH level is above 7, mixing should not be performed.
It is important to note that the concentrated form of TruBiol Plant Antifreeze has an acidic pH range of 3.5-5. Therefore, it should not be mixed with chemicals with a pH value above 7, pesticides, or wetting agents. Mixing with these substances may result in sediment blocking the equipment used for application, leading to clogging and reduced effectiveness of TruBiol Plant Antifreeze.
Under normal conditions, municipal water at pH 6 contains 0.4 ppm (mg/L) free chlorine (Ref: 40 CFR Part 141, Subpart H).